Half blood knot

Ties line to a hook, swivel or lure

Also known as
fisherman's knot, clinch knot, tucked half blood
Difficulty
Easy
Relative strength
Medium
Lines
Mono, Copolymer, Fluorocarbon
Use it for
Hook, Swivel

Step by step

  1. Thread the eye

    Pass 10-15cm of line through the eye and fold the tag back along the standing line.

  2. Wrap five turns

    Wind the tag around the standing line five times on thick line, or seven to nine times on fine line.

  3. Pass the tag through the small loop

    Bring the tag back and push it through the small loop next to the eye.

  4. Optional: tuck for thin line

    On thin line, pass the tag back through the large loop as well so the knot cannot slip.

  5. Wet and pull tight

    Wet the knot, pull the standing line slowly so the turns bed down on the eye, then trim the tag.

What goes wrong

  • Pulled tight dry. Wet the knot first or the line burns.
  • Too many turns on thick line stop the knot bedding down. Use five.
  • Too few turns on fine line. Use seven to nine.
  • Braid. The knot holds poorly in braid, so tie a Palomar instead.

In the Tightlog app this knot animates step by step - scrub through it with a thumb, on the bank, with no signal.

Download

All knots and rigs