Figure-of-eight loop

The UK default hooklength loop

Also known as
figure 8 loop
Difficulty
Easy
Relative strength
High
Lines
Mono, Copolymer, Fluorocarbon, Braid
Use it for
Loop

Step by step

  1. Double the line

    Fold the end of the line back on itself to make a long bight.

  2. Fold the bight back

    Carry the tip of the bight back over the doubled line, so it crosses in front and makes the first loop.

  3. Behind, then through

    Take the bight around behind both strands, then through the first loop from the front. The crossings make a figure of eight.

  4. Set the loop and tighten

    Size the loop, wet the knot, then pull the loop, the standing line and the tag together. Check you can see the eight, then trim the tag.

What goes wrong

  • A twist in the doubled line gets locked into the loop.
  • Loop tied too small to thread a loop-to-loop connection.

In the Tightlog app this knot animates step by step - scrub through it with a thumb, on the bank, with no signal.

Download

All knots and rigs